← Back to the chapter · Previous detail · Next detail →
Technical detail · Hardware Prototyping Case Studies
Check placement and transient response
Decoupling places capacitors near a load to help keep its supply steady during fast changes. The deeper point is that the revision must follow the measurement. The scope said “the rail drops ~0.5 V for ~10 us during TX,” and that measurement sized the capacitor and set the regulator spec. The same evidence also checks placement and part choice: a capacitor with high ESR, long leads, or a long return path may store enough charge on paper while failing at the module pins. A practical revision pairs bulk storage with low-ESR ceramic decoupling, short traces, a ground return that does not share motor or relay current, and a regulator whose transient response is documented near the required load step.