Clock a Register Read after Selecting the Right Peripheral

Clock a Register Read after Selecting the Right Peripheral

animation

Clock a Register Read after Selecting the Right Peripheral

Predict what happens when the display’s driver leaves the bus in a different mode. The next sensor read needs to restore its timing contract before asserting select. Next, hold both chip-select lines active in a controlled diagnostic setup only if the hardware permits a safe test. Two peripherals driving MISO can corrupt data or cause electrical contention; normal firmware must prevent that state.

Technical boundaries. The register-read exercise assumes a sensor shares a bus with a display whose driver can leave a different timing mode, so the sensor must restore its contract before selection. Its diagnostic suggestion stops applying when hardware cannot safely tolerate both chip-select lines being active, since simultaneous MISO drivers can corrupt data or cause electrical contention.

Back to the chapter