← Back to the chapter · Previous detail · Next detail →

Technical detail · PCB Design and Fabrication

Choosing the layer count

Impedance describes how a path responds to a changing electrical signal. Trace width, spacing, and the nearby return path change that response. A sudden mismatch can reflect part of a fast signal and distort it. Controlled impedance means choosing the trace and return geometry to meet a target so a high-speed or radio signal travels as intended. Layer count is an engineering tradeoff, not a badge. A simple low-speed board can often start with two layers if ground return remains continuous and routing is not forced into long detours. Move to more layers when routing density, controlled impedance, split power domains, quiet analog return, radio layout, or high-speed interfaces make the two-layer return path fragile.

Layer review question.

Do not ask, “Can the router finish?” Ask, “Can the return paths, power paths, test points, and keep-outs still be inspected after routing?”

← Back to the chapter · Previous detail · Next detail →