← Back to the chapter · Previous detail · Next detail →

Technical detail · Why Hardware Prototyping Matters

Compare enclosure loss with RSSI quantisation

A decibel (dB) expresses a power ratio on a logarithmic scale. Received signal strength (RSSI) is the radio’s reported measure of incoming signal power. Effective aperture is the antenna’s equivalent receiving area for a given incoming field. A radio reports in steps, so rounding a value to the nearest step adds quantisation noise. A 1 dB reporting step is the spacing between reported levels; it is not itself the noise standard deviation. Under the uniform-rounding model, that standard deviation is about 0.289 dB. These ideas let us compare the predicted shift with the rounding noise.

The mathematical gist. A 4 dB enclosure loss scales an antenna’s effective aperture by 10−4/10=0.39810^{-4/10}=0.398, so it receives only 39.8% of the former power in the same field. A radio with 1 dB RSSI steps has about 1/12=0.2891/\sqrt{12}=0.289 dB of quantisation noise, making the 4 dB shift a 13.9-standard-deviation effect rather than ordinary one-step wobble.

This comparison considers quantisation noise alone. It excludes fading, motion, and other RSSI variation, so it does not by itself establish the cause of a field signal change.

← Back to the chapter · Previous detail · Next detail →