← Back to the chapter · Previous detail · Next detail →
Technical detail · Energy Measurement and Profiling
Separate cell sag from shunt burden
At the chapter’s 200 mA pulse, a 1-ohm measurement shunt drops 0.200 V. This example assumes a catalog-typical 10-ohm CR2032 internal resistance, which drops another 2.00 V. A 3.0 V open-circuit cell therefore reaches only 0.80 V at the load with the meter connected. Removing the shunt recovers 0.20 V, but the cell’s own 2.00 V sag still dominates. This calculation depends on that assumed cell resistance; keep it with the result when separating source limitations from measurement burden.