← Back to the chapter · Previous detail · Next detail →
Technical detail · Low-Power Design: Sleep-State Energy Accounting
Worked 1 nW average front-end budget
This is an illustrative allocation, not a claim about a named chip:
- A chopper-stabilized amplifier consumes 20 nW while active for 10 ms each second: nW average.
- A SAR ADC uses 10 pJ per conversion for 10 conversions each second: pJ/s, or 0.10 nW.
- The always-on timer, reference, switch leakage, and bias network receive the remaining 0.70 nW.
- Total average front-end power is therefore 1.00 nW before sensor excitation, regulator loss, processor wake, storage, or radio work.
The arithmetic is easy; proving every term is not. The review must show active duration from a trace, conversion energy at the actual voltage and resolution, reference settling, temperature leakage, and the measurement instrument’s own floor. If the front end needs ten times longer to settle, its amplifier contribution becomes 2 nW and the budget fails before a single packet is transmitted.