← Back to the chapter · Previous detail
Technical detail · Low-Power Design: Sleep-State Energy Accounting
Derive the CC2650 wake and retention costs
At 48 MHz, the active-core model gives
A 151 s standby-to-active transition spans
clock periods. Approximating the transition at the active current gives 0.444 C, or about 1.33 J at 3 V, before useful instructions. That fixed wake term is why batching several tasks behind one wake can save more energy than shaving a few cycles from each task.
Retention uses more sleep current but may avoid cache refill or reinitialization. Compare two states over sleep duration :
If cache retention costs an extra 1.7 A but avoids 1,500 active cycles at 48 MHz, the avoided active charge in this simplified model is
The break-even sleep interval is nCA\approx54$ ms. With shorter sleeps, retention wins in this hypothetical workload; with longer sleeps, the lower-current state wins. Replace 1,500 cycles with a trace from the actual firmware, include oscillator and regulator transitions, and repeat at the required temperature.