← Back to the chapter · Previous detail · Next detail →
Technical detail · Low-Power Design: Sleep-State Energy Accounting
Where practitioner work meets analog design
| Mechanism | What it changes | Practitioner evidence | Chip-design boundary |
|---|---|---|---|
| Leakage control | Reduces current that flows while no useful sample is being taken | Measure the complete sleep floor across temperature, rail states, pull-ups, and input pins | Transistor threshold, device geometry, isolation wells, and process corners |
| Body bias | Changes effective transistor threshold to trade leakage against speed | Treat adaptive body bias as a documented silicon feature; verify wake latency and operating limits | Bias generator stability, latch-up margin, device reliability, and corner analysis |
| Chopper stabilization | Modulates low-frequency sensor information away from amplifier offset and low-frequency noise, then demodulates it | Verify input bandwidth, ripple/filtering, settling time, and alias rejection for the chosen amplifier | Switch charge injection, clock feedthrough, amplifier topology, and ripple loop |
| SAR ADC conversion | Charges and redistributes a capacitor array while a successive-approximation search resolves the code | Count energy per conversion, reference settling, acquisition time, resolution, and sample rate in the duty-cycle trace | Capacitor matching, comparator noise, switching scheme, reference buffer, and digital logic |