IoTClassTeacher kit · MQTT

Run sheet · MQTT QoS Levels · 70 min

TimeTeacher doesLearners doLink
0–5 minShow the QoS selection flowName the guarantee of each QoS levelChapter
5–8 minCompare QoS 0, 1 and 2 by the packets each one sendsMatch each QoS level to its delivery guaranteeChapter
8–12 minChoose a QoS level for a valve command and for a gauge readingPredict which level a subscriber really gets when publisher and subscriber differChapter
12–57 minRun the QoS comparison under packet loss and read the countsRecord how many messages arrive at each levelLab
62–70 minAsk which question decides between QoS 1 and QoS 2State the QoS level for a repeating reading and for a commandChapter

Break: 5 minutes after the lab

If the lab fails: Trace the QoS 0, 1 and 2 packet exchanges on paper using the chapter's packet ledger. Camera off: Ask pairs to write the level they would pick for each message family.

Next move: If many learners pick QoS 2 for everything, compare the packet cost with the cost of a repeat.