Try It Yourself
Try It Yourself
The exercises turn the same quality fields into field evidence: satellite geometry, acquisition time, multipath, and track smoothness.
Hands-on exercises to understand GPS mechanics:
Exercise 1: Observe GDOP Changes
Use a satellite tracking app (GPS Test, GPSTest+ for Android):
- Record satellite positions and HDOP/GDOP in open field (good sky view)
- Walk to urban area between buildings (limited sky view)
- Compare satellite count and geometry
What to observe: Open sky may show 8-12 satellites spread across the sky; an urban canyon may show 4-6 satellites clustered overhead. Compare the reported HDOP/GDOP and fix quality; satellite count alone does not determine expected accuracy, and HDOP scales horizontal uncertainty.
Time to First Fix (TTFF)
Test GPS acquisition speed:
- Use the receiver’s documented cold-start reset to clear stored time, position, almanac and ephemeris; record which assistance data were cleared. If the device cannot clear these, call the trial a warm restart.
- After a cold-start reset, enable GPS in airplane mode (no network assistance)
- Time how long until position fix
- Repeat with cellular data enabled (A-GPS active)
What to observe: TTFF ranges depend on the device and conditions. Record the observed cold-start or warm-restart time and whether assistance data were available. A-GPS can provide assistance data over a network.
Track Multipath Environments
Use GPS logger app to record tracks in different environments:
- Open field: Walk 100-meter straight line, record GPS track
- Urban canyon: Walk same distance between tall buildings, record track
- Forest: Walk under dense tree canopy, record track
- Compare actual distance to GPS-calculated distance
What to observe: Open field track is smooth and accurate (±5m). Urban track has large jumps and zigzags (±20-50m from multipath reflections). Forest track has gaps where signal is lost entirely. This demonstrates environmental impact on GPS performance.