Interactive: I2C Bus Scanner

Interactive: I2C Bus Scanner

animation
sensors
protocols
Try Leave Add Sensor to Bus: on BMP280 (Pressure) and Use alternate address off; click Add to Bus, then press Check bus addresses to scan.
Observe The bus begins empty; after adding the default BMP280, the scan lists it at 0x76 in the found-device results.
Explain The scan checks whether an added device occupies each address in a fixed list of 18 and marks a match as ACK.

Technical boundaries. The scanner assumes devices respond solely according to its in-memory address list, without contacting hardware. It checks 18 preset addresses and silently rejects a second device at an occupied address; electrical timing and real address collisions are not simulated.

NoteInteractive: I2C Bus Scanner

This simulation demonstrates how I2C bus scanning works. Add devices to the bus, then click “Scan Bus” to see the master controller query each address and detect ACK/NACK responses.

Back to the chapter