Try the Motor-Speed Rule

Try the Motor-Speed Rule

animation
sensors
braitenberg
Try Leave Left sensor reading at 800 and Right sensor reading at 200, then change Vehicle type from the opening cross-wired excitatory mode.
Observe At Gain factor 0.15, the opening left motor command is 30 and the right is 120; the result says Turns LEFT.
Explain Vehicle type chooses same-side or crossed sensor mapping; excitatory modes multiply by Gain factor, while inhibitory modes subtract that amount from base speed.

Technical boundaries. This rule assumes sensor readings can map directly to motor commands, which are rounded and clipped to 0–1023. A command difference below 5 is classified as straight; wheel motion, traction and vehicle position are not simulated.

Try the Motor-Speed Rule

Adjust the sensor readings and wiring configuration to see how different Braitenberg vehicles respond. Observe how the same sensor values produce completely different motor speeds and turning behavior depending on wiring topology and polarity.

Back to the chapter