UWB two-way ranging narrated tour

UWB two-way ranging narrated tour

animation
uwb
ranging

UWB two-way ranging narrated tour

Play silently with captions on provisional storyboard timing; narration audio is pending. Production pacing is not protocol time. Choose Reduced motion for a complete still at each beat.

Play the tour to open the workbench. Pause, replay a beat, or read the full transcript below. Some situations cannot be shown by this teaching model; those beats keep the existing frame and provide captions only.

Full transcript — UWB two-way ranging (8 beats)

B1 — Cabinet decision
You are the engineer setting up a connected tool cabinet. It must decide whether a tagged device is within about one point five metres. A distance error could change that decision. How can a radio exchange give your cabinet a distance it can use?

Model caption: Your tool cabinet must decide whether a tagged device is within about 1.5 m; distance error can change that decision.

B2 — Poll and response
Ultra-wideband, or UWB, uses very short radio timing events across a wide range of frequencies. Two-way ranging measures a round trip between two devices. The device starting the exchange sends a poll. The responder receives it, waits, and sends a response back.

Model caption: Ultra-wideband uses short radio timing events. Two-way ranging times a poll-and-response round trip, including the responder's wait.

B3 — Subtract the wait
Single-sided two-way ranging measures the whole exchange on the starting device's clock. Subtract the responder's reported waiting time, then halve the remaining time to get the flight time in one direction. Multiply by the speed of light to turn that flight time into distance.

Model caption: Subtract reported responder wait from the whole exchange, halve the remainder, then multiply by light speed to calculate distance.

B4 — Clock mismatch
The waiting time comes from the responder's clock, while the whole exchange is timed by the starting device's clock. Their clocks can run at slightly different rates. That mismatch turns some of the reply delay into a distance error, even after the subtraction.

Model caption: Round trip and reply delay come from different clocks. A clock-rate mismatch leaves distance error after subtraction.

B5 — Thirty centimetres
Suppose your responder waits one hundred microseconds, and its clock differs by twenty parts per million. Multiply one hundred microseconds by twenty, then divide by one million. The apparent waiting-time error is about two nanoseconds. At about zero point three metres per nanosecond, multiply by two nanoseconds and divide by two for the round trip. The distance bias has a magnitude of about thirty centimetres.

Model caption: 100 microseconds × 20 / 1,000,000 ≈ 2 ns. 0.30 m/ns × 2 ns / 2 ≈ 0.30 m bias magnitude. The model's +20 ppm setting reads about 7.70 m for a true 8 m.

B6 — Third message
Double-sided two-way ranging adds a third message so each device measures a round trip. Combining those measurements cancels much of the error caused by the different clock rates. Your cabinet gets less clock-sensitive timing, at the cost of another message and more energy per range.

Model caption: A third message supplies a round trip on each device. Double-sided timing reduces clock-rate error; another message costs energy. With unchanged example settings, the model estimates about 8.00 m.

B7 — Remaining path bias
The misconception is that the extra message removes every source of distance error. It reduces clock mismatch, but a reflected radio path can still arrive later than the direct path. That extra travel time can make the measured distance too long, even with double-sided ranging.

Model caption: One misconception: the extra message removes every distance error. A late reflected path can still lengthen the range. The model's fixed 30 cm bias remains after clock correction.

B8 — Ranging takeaway
Two-way ranging subtracts the wait; double-sided ranging reduces clock error; neither straightens a reflected path.

Model caption: Two-way ranging subtracts the wait; double-sided ranging reduces clock error; neither straightens a reflected path.

Back to the chapter