RFID EPC Gen2 Inventory Workbench

RFID EPC Gen2 Inventory Workbench

animation
rfid
protocols

RFID EPC inventory narrated tour

Play silently with captions on provisional storyboard timing; narration audio is pending. Production pacing is not protocol time. Choose Reduced motion for a complete still at each beat.

Play the tour to open the workbench. Pause, replay a beat, or read the full transcript below. Some situations cannot be shown by this teaching model; those beats keep the existing frame and provide captions only.

The workbench uses an illustrative 12-tag frame, then a separate 7-tag frame. The chapter’s 48-tag calculations and Q=9 comparison are caption-only. Slot outcomes are random; an ACK is shown only after a real successful reply. If preparation finds no success, the tour holds RN16 with the explanation in captions.

Full transcript — RFID EPC inventory (8 beats)

B1 — Dock-door inventory
You are the engineer setting up a radio frequency identification reader, or RFID reader, at a warehouse dock door. A tagged pallet is moving through the reading area. Your job is to identify its items before they leave; wasted time can mean missed reads.

Model caption: You configure a radio frequency identification reader at a warehouse dock door. A moving pallet gives limited time to identify its tags; wasted time can mean missed reads.

B2 — Query and slot choice
The electronic product code, or EPC, is an item's structured identifier. To collect those identifiers, the reader opens an inventory round with a Query command. It announces a parameter called Q, which sets how many time slots are available. Tags choose slots randomly, spreading their replies across the round.

Model caption: Illustrative asset population: 12 tags, Q=4, 16 slots.

B3 — RN16 reply
The slot count is two raised to the power of Q. Each tag chooses a counter from zero through the slot count minus one. When that counter reaches zero, the tag replies with a sixteen bit random number, known as R N sixteen.

Model caption: Slots = 2^Q; counters range from 0 to 2^Q − 1. At counter zero, a tag replies with a sixteen-bit random number, RN16. More than one eligible tag can collide.

B4 — Conditional ACK
If the reader decodes a single reply, it echoes that random number in an acknowledgement, called an ACK. The selected tag then returns its EPC. A command called QueryRep advances to the next slot, and the remaining active tags decrease their counters. Random slot choice and acknowledgement let tags be read individually.

Model caption: ACK means acknowledgement. The reader echoes a decoded single tag's RN16; that selected tag returns its EPC. QueryRep advances to the next slot and remaining tags decrease their counters.

B5 — 48-tag estimate
For your dock door, take the chapter's example of forty-eight tags. The starting estimate rounds the base two logarithm of the tag count upward. That gives Q equal to six. Two raised to the power of six gives sixty-four slots, providing room for the forty-eight tags to spread out.

Model caption: Chapter example: 48 tags. Starting estimate Q = ceil(log₂(48)) = 6. Frame size = 2^6 = 64 slots. This gives tags room to spread out.

B6 — Frame size comparison
Compare two other settings for the same population. Q equal to four gives sixteen slots, so many of the forty-eight tags choose the same slots and collide. Q equal to nine gives five hundred twelve slots, so the reader can spend time advancing through mostly empty slots.

Model caption: Same 48 tags: Q=4 gives 16 slots and many collisions. Q=9 gives 512 slots and mostly empty slots.

B7 — Empty slot tradeoff
The misconception is that increasing Q always makes inventory faster. A larger Q reduces collisions, but it also lengthens the round. Empty slots use time without returning a tag identifier. For your moving pallet, both an overcrowded frame and an oversized frame can mean missed reads.

Model caption: Separate illustration: 7 tags, 64 slots.

B8 — Inventory takeaway
Give tags room to take turns, without making the reader spend the round waiting through empty turns.

Model caption: Give tags room to take turns, without making the reader spend the round waiting through empty turns.

Back to the chapter