Antenna Gain and ADC Noise

Antenna Gain and ADC Noise

EIRP is the equivalent power radiated in the antenna’s strongest direction. dBm expresses power relative to one milliwatt, while dBi expresses antenna gain relative to an ideal uniform antenna. An ADC converts a voltage to a digital number. RMS quantisation noise is the root-mean-square size of error due to rounding that value to a step.

The mathematical gist. At 0 dBm transmit power, a 2 dBi chip antenna gives 1.58 mW EIRP while a 9 dBi panel gives 7.94 mW. Ideal range grows by 7.94/1.58=2.24\sqrt{7.94/1.58}=2.24. Equivalent beam solid angle expresses an ideal directional beam as a fraction of the full sphere around the antenna. The lossless model assumes no power is lost in the antenna. Under this model, the equivalent beam solid angle is 63.1% and 12.6% of a sphere, respectively. These are model values, not the actual coverage of either antenna. Separately, a 12-bit 3.3 V ADC has 0.806 mV steps and 0.233 mV RMS quantisation noise.

Math Bridge · guided foundationsWhat does a higher-gain gateway antenna trade away?Let Voltage Vera compare EIRP, ideal range, coverage angle, and the separate ADC noise floor. Higher gain sends more power in a preferred direction. In the example, ideal range grows while the beam covers less of the area around it. Walls and reflections affect real links, so a field test must check the result. The ADC noise floor is a separate measurement question.

Back to the chapter