Observe One Missing Fragment Consume Receiver State
Observe One Missing Fragment Consume Receiver State
animation
<h3 class="anchored">Interactive: Observe One Missing Fragment Consume Receiver State</h3>
<p>The packet-size and reliability gates meet at the reassembly buffer. Use the missing-and-timeout preset below to dispatch four fragments while fragment 3 is absent, then advance the receiver clock to the 60-second discard time. The byte-offset map shows why arrival order is recoverable but missing coverage is not.</p>
<p>Dispatch the available fragments, identify the uncovered byte range, then advance to timeout and record the buffer and retry consequence.</p>
<p>Document the held bytes, missing range, and responsibility for the timeout in the network design. This makes the maximum transmission unit (MTU), the largest unit a link can carry without fragmentation, operational: one lost fragment can retain receiver state for the entire datagram and force upper-layer recovery.</p>
Technical boundaries. The 6LoWPAN Reassembly Timeout Workbench uses a preset involving four fragments with fragment 3 absent and a receiver discard time of 60 seconds. Its demonstration of recoverable arrival order stops helping when byte coverage remains missing: at the stated timeout, incomplete reassembly requires discard and upper-layer recovery rather than reconstruction from the fragments already received.