Mobile Gateway Protocol Review
Mobile Gateway Protocol Review
Practice resources: T-104 source and normalized records, protocol-path figure, and Protocol Translation Visualizer.
Trace one record from the nearby device to local storage and the cloud. Remove the link, change the unit, repeat the upload, age the record, and restart the phone. Record identity, time, quality, state, and each rejection.
Step 1: Trace one source record
Trace one raw record to expose every handoff. Compare each later field with the source; a missing identity or time means the trace is incomplete.
- Copy the
T-104source record above into a local text file or lab notebook; label itraw, notcloud. - On the protocol-path figure, follow that record through parser, contract, buffer, upload, and cloud schema.
- At each boundary, write the source identity, visit binding, version, and point where rejection or duplication can occur.
- The expected trace has separate source and gateway times; a single unlabeled timestamp loses provenance.
- Keep the source sample beside the trace so a reviewer can check every later transformation against it.
Step 2: Map the fields before upload
Make the field mapping explicit before upload. The expected record lets a reviewer compare the actual output with the contract.
- In the translation visualizer above, choose a source and target protocol and inspect the field mapping; save the settings you used.
- The browser run showed
Translation complete: gateway pipeline recalculatedand a compatible-semantics diagnosis for its default preset. - In your contract table, map
tag_idtosource_id,temptotemperature, and preserveC, quality, and source time. - Treat the visualizer as a mapping aid; verify the chapter’s exact record with a local parser before claiming an accepted result.
- In the local fixture run, the accepted line was
ACCEPT source_id=T-104 metric=temperature value=7.4 unit=C source_time=2026-06-13T09:14:22Z. - Record
tag-temp-v3as the intended translation version and keep gateway time as a distinct field.
Step 3: Reject unsafe inputs with a reason
Change one input at a time to find which rule rejected it. A rejection reason shows why the record did not reach the queue.
- Run the source record through each validation rule, changing one field at a time so the failed rule is identifiable.
- For the local fixture, changing
unit=Ctounit=FreturnedREJECT unsupported_unit. - Removing
tag_idreturnedREJECT missing_tag_id; neither rejected record may enter the upload queue. - Check the visit allowlist, numeric range, parsed source time, and allowed quality before marking a record accepted.
- Save each rejected input with its reason, because an accepted output alone cannot demonstrate safe validation.
Step 4: Exercise the offline retry rule
Test a lost link and a retry to see whether the queue retains the record and recognizes a repeat. The fixture result is evidence for the local rule only.
- Disconnect the upload path in your implementation or use a local queue fixture; note the outage start and queue depth.
- Give each reading a stable identity from source and source time before retrying after reconnection.
- The local fixture produced
QUEUEDon first receipt andDUPLICATEon the same key’s retry. - Record the stale threshold, full-buffer action, retry count, and cloud rejection retention rule beside the trace.
- A real phone upload still needs field verification; this fixture proves only the local duplicate decision.
Step 5: Assemble the reviewable release pack
Gather the outputs in one place so someone else can assess the release. Missing field or device evidence leaves the release provisional.
- Put the raw sample, normalized record, mapping table, and version identifiers in one evidence folder.
- Add accepted and rejected validation inputs, preserving the exact reason for every rejection.
- Include the queue trace with outage start, depth, retries, stale threshold, and duplicate disposition.
- Compare source time with gateway and upload times rather than replacing one timestamp with another.
- Mark the release provisional until the approved phone, local protocol, and cloud path have been run together.
The lab makes this concrete: force a gap longer than the buffer can hold and confirm the overflow behaves as designed and is logged, rather than crashing or silently discarding data.
The lab should therefore replay at least one lost-acknowledgment case, one out-of-order drain, one full-buffer case, and one stale-record rejection before the gateway is trusted in a moving deployment.
Technical boundaries. The local fixture proves only the local duplicate decision, and the visualizer is a mapping aid. The release remains provisional until the approved phone, local protocol, and cloud path have been run together.