Build A Mission Record
Build A Mission Record
Lab Practice: Build A Mission Record
Use this practice workflow for a survey, inspection, or search mission. It avoids pretending that one set of numbers applies to every aircraft.
Run it: Before you write the coverage assumptions in step 3, make the pattern real in the coverage workbench below instead of guessing numbers. Select a scenario preset (Field survey, Solar inspection, Search grid, or Emergency map) to match your data goal, choose a Route pattern (Lawnmower, Spiral, or Sector), then press Play or Step and read the footprint, route length, turn overhead, coverage, and skipped-area metrics. Carry those observed values into the pattern choice (step 2) and the coverage assumptions (step 3) of your mission record; keep the avoidance, energy-gate, and post-flight reasoning on the steps below.
- Define the data goal: complete map, boundary condition, detailed inspection, relay uptime, search probability, or transit.
- Choose a pattern: survey lanes, perimeter loop, point inspection, search expansion, transit, or station-keeping.
- Record coverage assumptions: footprint, overlap, path spacing, altitude envelope, route constraints, and quality gate.
- Add avoidance records: conflict sources, sensor limits, geofence, operating rules, approved separation basis, and fallback behavior.
- Apply energy gates: launch gate, segment gate, dwell gate, scope gate, and return gate.
- Define post-flight outputs: flown path, skipped regions, avoidance events, battery behavior, data-quality result, and corrective action.