TryWith Load Current (A) at 2, compare the two Total Loss columns. Adjust BJT Current Gain (beta) from 100 to see the base-current change.
ObserveThe defaults show 0.1120 W for the MOSFET and 1.0860 W for the BJT total. The displayed 9.7x advantage is a ratio of these losses.
ExplainThe MOSFET term squares Load Current (A) and multiplies by its on-resistance. The BJT total adds collector loss to a drive term using current divided by beta and GPIO voltage minus 0.7 V.
Technical boundaries. This comparison assumes fixed on-resistance, saturation voltage and current gain. It omits MOSFET gate and switching losses and BJT base-terminal power; its GPIO warning uses a fixed 20 mA threshold.
MOSFET vs BJT Power Calculator
Use the sliders to compare illustrative conduction losses. The displayed “more efficient” ratio is a loss ratio, not system efficiency. The base-drive term omits base-terminal power, and the MOSFET result omits gate and switching losses. Check the actual device and driver before using the result.
viewof calc_load_current = Inputs.range([0.01,10], {value:2,step:0.01,label:"Load Current (A)"})viewof calc_rdson = Inputs.range([0.005,1.0], {value:0.028,step:0.001,label:"MOSFET Rds(on) (Ohm)"})viewof calc_vcesat = Inputs.range([0.1,1.5], {value:0.5,step:0.05,label:"BJT Vce(sat) (V)"})viewof calc_beta = Inputs.range([20,500], {value:100,step:10,label:"BJT Current Gain (beta)"})viewof calc_vgpio = Inputs.range([3.3,12], {value:5,step:0.1,label:"GPIO Voltage (V)"})