Try It: RSSI Proximity Estimator

Try It: RSSI Proximity Estimator

animation
bluetooth
ble
Try Start with Measured RSSI (dBm) at -65, then move the slider toward a stronger signal.
Observe At the default -65 dBm, the card reads NEAR (1–3m) and Strength: 44%. Watch the zone label and bar change as you move the slider.
Explain Measured RSSI (dBm) selects a zone by fixed signal cutoffs. The strength bar scales that same input across the slider range.

Technical boundaries. The input spans -100 to -20 dBm in steps of 1; strength is (RSSI + 100) × 100 / 80, clamped to 0–100%. The mapping assumes cutoffs of -50, -70 and -90 dBm for the displayed distance bands, without modelling walls or antenna orientation.

NoteTry It: RSSI Proximity Estimator

Adjust the RSSI value to see how signal strength maps to proximity zones, matching the classification used in the scanner code above.

Checkpoint: you should now see scan results in the Serial Monitor. Each line should include a device name if one was advertised, an address, an RSSI value in dBm, and a proximity label such as NEAR or FAR.

Back to the chapter