Interactive Sensor Network Designer

Interactive Sensor Network Designer

animation
iot
applications
Try Change Terrain Complexity, then press Calculate cost.
Observe Watch Total Sensors and Total Cost after you press Calculate cost.
Explain Explain why terrain changes required sensors when you press Calculate cost.

Technical boundaries. Coverage uses terrain-based correlation distances. The tiered strategy uses 5% reference, 30% mid-grade and 65% low-cost sensors, with at least 3 reference sensors even after budget adjustment.

Interactive Sensor Network Designer

Design an optimal sensor network by balancing coverage, accuracy, and cost using the tiered approach from the worked examples.

Using This Calculator

This tool implements the tiered sensor strategy from the air quality and weather station examples:

  1. Set your coverage area - Total km² you need to monitor
  2. Choose terrain complexity - Determines correlation distance (flat: 20km, moderate: 12km, complex: 6km)
  3. Configure sensor costs - Adjust to match your vendor quotes
  4. Set your budget - See if the tiered strategy fits

Key Principles:

Present 5/30/65 as a selectable starting mix in the calculator, with accuracy validated for local conditions. - Minimum 3 reference sensors: Always deploy at least 3 for calibration redundancy Under the calculator’s 20 km versus 6 km correlation-distance assumptions, a simple area-density model yields about 11× as many sites; validate spatial correlation for the terrain. - Cost savings: Tiered approach typically achieves 75-90% cost reduction vs. all-reference deployment

What to Observe:

  • How terrain complexity dramatically affects sensor count
  • Why the tiered strategy saves money while maintaining data quality
  • The importance of maintaining reference sensors even when over budget

Back to the chapter