Multi-Sensor Compression Pipeline

Multi-Sensor Compression Pipeline

animation
analytics-ml
edge
compression
Try Change Vibration Sample Rate (Hz) from 1000 to 5000.
Observe Compare Raw (B/s), Compressed (B/s), and Ratio for Vibration (FFT Top-10) at 5000 Hz.
Explain Explain why vibration Raw (B/s) changes at 5000 Hz while Compressed (B/s) remains fixed.

Technical boundaries. Temperature uses 16 bytes per 300 seconds; vibration uses 40 bytes per 10 seconds. Motion assumes 3 events/hour, and pressure assumes a 5x ratio at 10 Hz.

NoteMulti-Sensor Compression Pipeline

Configure sensor counts and sampling rates to see how different compression strategies affect total bandwidth for a multi-sensor system.

Back to the chapter