Edge Bandwidth Savings Calculator

Edge Bandwidth Savings Calculator

animation
edge-computing
analytics
Try Change FFT window size (samples), then press Calculate.
Observe After Calculate, compare Per-sensor rate, Monthly volume, Monthly cost, and Savings.
Explain Describe how FFT window size changes Monthly volume after Calculate.

Technical boundaries. Edge calculations use 2 bytes per frequency component and 2592000 seconds per month. Costs use cloud ingestion cost; the calculator does not test whether the cloud can still make its decision.

Edge Bandwidth Savings Calculator

Use this interactive calculator to explore how edge processing reduces bandwidth and cost for vibration monitoring fleets.

The architecture diagram in Figure 1 connects the calculator’s bandwidth result to the physical processing path that produces it.

An edge IoT gateway bridges internet servers and devices over RF and wire. Big things use complex data models; small and non-IP things have constrained, simple models.
Figure 1: Edge IoT architecture and processing overview

Read Figure 1 from the sensors to the edge gateway. The gateway tests, filters, and groups the data before it sends a smaller stream to the cloud. Compare the raw and reduced paths with the result from the calculator. The math gives the size of the saving, while the diagram shows where it is made. That point must also keep the meaning of each event. A lower byte count is useful only if the cloud can still make its decision and the gateway logs what it dropped or grouped.

Back to the chapter