Putting Numbers to It

Putting Numbers to It

animation
actuators
Try Keep Supply Voltage (V) at 12 and Peak Current (A) at 0.5. Move Duty Cycle (%) from 40 toward 100 and compare the daily energy.
Observe At 40% duty, Average Power is 2.40 W and Energy Savings is 60.0%. Watch Daily Energy Consumption rise as duty increases.
Explain The tool multiplies 12 V by 0.5 A and the duty fraction to get average power. Multiplying that power by Operating Hours per Day gives daily energy.

Technical boundaries. This estimate assumes peak current stays constant during each on interval. The controls span 1–24 V, 0.1–5 A and 0–100% duty; no startup surge or driver loss is included.

TipPutting Numbers to It

Actuator control decisions are often power-budget decisions. For PWM-driven loads:

Pavg=V⋅Imax⋅D P_{\text{avg}} = V \cdot I_{\text{max}} \cdot D

where DD is duty cycle (0 to 1).

Worked example: A 12V motor with 0.5A peak current at 40% duty cycle draws:

Pavg=12×0.5×0.40=2.4 W P_{\text{avg}} = 12 \times 0.5 \times 0.40 = 2.4 \text{ W}

Running 2 hours/day consumes 2.4×2=4.82.4 \times 2 = 4.8 Wh/day. At 100% duty cycle it would be 12 Wh/day, so duty-cycle control cuts daily energy by 60% while still delivering usable actuation.

Interactive Calculator:

Back to the chapter