← Back to the chapter · Previous detail · Next detail →

Technical detail · Z-Wave for Smart Homes

GFSK pulse shaping

Frequency-shift keying represents bits by moving the carrier between frequency states. If the baseband symbol sequence jumps abruptly between −1-1 and +1+1, its sharp edges contain high-frequency components that spread the modulated signal beyond the desired channel. Gaussian frequency-shift keying (GFSK) smooths that sequence before it drives the frequency modulator.

Let the binary symbol waveform be a(t)∈{−1,+1}a(t)\in\{-1,+1\} and a Gaussian filter have impulse response

hG(t)=Kexp⁡ ⁣(−t22σ2).h_G(t)=K\exp\!\left(-\frac{t^2}{2\sigma^2}\right).

The shaped control signal is the convolution

m(t)=(a∗hG)(t),m(t)=(a*h_G)(t),

and the instantaneous carrier frequency becomes

fi(t)=fc+Δf m(t).f_i(t)=f_c+\Delta f\,m(t).

Convolution turns a step between symbols into a gradual transition. The modulator therefore changes frequency smoothly instead of responding to a rectangular edge, reducing sidelobes and occupied bandwidth. The usual BTBT parameter—the Gaussian filter’s bandwidth multiplied by symbol period—expresses the trade-off: a smaller BTBT narrows the spectrum more aggressively but spreads each transition across more symbol time, increasing intersymbol interference if taken too far. The receiver and transmitter must implement the same PHY profile; pulse shaping is not a field tuning knob to change independently.

Keep line coding separate from modulation. Manchester-style coding controls transition and clock-recovery properties of the bitstream; Gaussian filtering shapes the pulses; FSK maps the shaped result into carrier-frequency deviation. Calling all three “GFSK” hides where an implementation or interoperability failure occurs.

← Back to the chapter · Previous detail · Next detail →