← Back to the chapter · Previous detail
Technical detail · AI, Wireless, and Energy Kits
Shared buses, memory, and target hardware
I2C and SPI are hardware buses that carry data between chips; parts sharing a bus must take turns using it. Link margin is how far the received signal exceeds the level needed for reception. A new case or antenna placement can reduce that reserve. Memory bandwidth is the rate at which data can move to and from memory. The Linux driver stack is software that connects hardware to the operating system. A kit with more bandwidth or different drivers may not match the final microcontroller. Under the hood, the hard part is often shared resources. A camera sensor, neural accelerator, radio module, flash chip, charger, fuel gauge, and microcontroller may compete for I2C or SPI buses, DMA buffers, interrupt lines, regulator headroom, thermal budget, and wake timing. A Jetson or Coral prototype may prove inference, but the final microcontroller cannot inherit its memory bandwidth or Linux driver stack. A LoRa kit may prove range, but the final enclosure and antenna feed can change link margin. An energy board may prove harvesting, but not when inference and transmit bursts overlap.