← Back to the chapter · Next detail →

Technical detail · Industrial Ethernet Family Design

PROFINET roles and configuration

The IO Controller manages cyclic data exchange with IO Devices. Each device sends data and status, including faults. An IO Supervisor can inspect or configure the network. The figure connects these roles to the records needed for release.

PROFINET role and evidence record showing IO controller, IO devices, supervisor, device description, cyclic data, alarms, diagnostics, and release evidence.
A PROFINET controller exchanges cyclic data with an I/O device against 4 ms servo and 20 ms remote-I/O targets. Five servo intervals fit within each remote-I/O interval, but timing must still be measured under load and retained with configuration evidence.

In Figure 5, the IO Controller owns the cyclic exchange with each IO Device. The device sends data and status; alarms and diagnostic reports help the team find faults. An IO Supervisor can inspect or configure the system. The device description and module layout tell the controller what to expect. Keep these records with the tested topology and update them when a device or its firmware changes. For PROFINET, document the IO Controller, IO Device, and IO Supervisor roles; module or submodule configuration; cyclic data layout; alarm and diagnostic behavior; topology assumptions; and change procedure for replacement or firmware drift.

← Back to the chapter · Next detail →