← Back to the chapter · Next detail →

Technical detail · Low-Power Design: Leakage and Body Bias

Why the thermal limit is about 60 mV per decade

A MOSFET does not become an ideal open switch when VGSV_{GS} crosses below threshold. In weak inversion, drain current is approximately exponential:

ID≈I0exp⁡ ⁣(VGS−VTnUT)(1−e−VDS/UT),I_D\approx I_0\exp\!\left(\frac{V_{GS}-V_T}{nU_T}\right) \left(1-e^{-V_{DS}/U_T}\right),

where UT=kT/qU_T=kT/q is thermal voltage and n≥1n\ge1 is the subthreshold slope factor. For VDSV_{DS} more than a few thermal voltages, the final factor approaches one. Taking a base-10 logarithm gives

log⁡10ID=constant+VGS−VTnUTln⁡10.\log_{10}I_D=\text{constant}+\frac{V_{GS}-V_T}{nU_T\ln10}.

The subthreshold swing—the gate-voltage change needed for one decade of drain-current change—is therefore

S=dVGSd(log⁡10ID)=nkTqln⁡10.S=\frac{dV_{GS}}{d(\log_{10}I_D)}=n\frac{kT}{q}\ln10.

At 300 K, kT/q≈25.85kT/q\approx25.85 mV, so the ideal n=1n=1 limit is S≈59.6S\approx59.6 mV/decade. The often quoted “60 mV per decade” is thus not simply kT/qkT/q; it includes ln⁡10\ln10, and practical devices have n>1n>1. Higher temperature makes the slope worse.

← Back to the chapter · Next detail →