← Back to the chapter · Previous detail
Technical detail · Energy Harvesting: Budgets, Conversion, and Storage
The average-power limit and its boundaries
In the ideal limit where storage is effectively unlimited, the long-run capacity of an additive white Gaussian noise channel can be treated like the classical Shannon channel with average transmit power equal to the average harvesting rate:
Here E_t is harvested energy per slot, T_s is slot duration in seconds, B_{\max} is storage capacity, W is channel bandwidth, and N_0 W is noise power. The average harvest rate supplies the ideal average transmit-power budget.
Finite storage changes the question. A store larger than the largest likely single energy arrival avoids one obvious size constraint, but that alone does not establish the average-power case: occupancy and the sequence of arrivals still matter. If storage clips arrivals, min(E_t, B_{\max}) bounds how much one arrival can contribute, while the actual accepted energy also depends on free space. Excess harvest is spilled instead of saved. Correlated arrivals matter as much as the mean: a long low-harvest coherence interval can drain the store even when the long-run average looks acceptable, while clustered high-harvest intervals may be wasted if the store is already full.
The engineering lesson is narrow but useful: average harvested energy sets the ideal average-power reference, while finite storage, cold-start behavior, and causal knowledge of E_t determine the field schedule. Use ordinary communication and coding techniques only after the measured harvest average closes; then add a storage-aware policy for the bad intervals. A good review states which regime the node is in, whether increasing B_{\max} is still useful, and whether the better fix is a larger store, a lower payload rate, or a different transmit-power policy.