← Back to the chapter · Previous detail · Next detail →
Technical detail · Energy Harvesting: Budgets, Conversion, and Storage
Causal energy and a finite store
A conventional battery-powered radio often starts from a fixed transmit-power budget. A harvesting transmitter has a different problem: energy arrives over time, may be random, and is often known only when the device has already harvested it. The communication design must therefore respect both the channel and the storage state.
For this normalized slot model, squared signal magnitude represents transmission energy. Let E_t be the harvested energy arrival, B_t the stored energy available before transmission, and X_t the transmitted signal in that slot. The transmitter can spend only what is in the store:
After the slot, the next storage state is bounded by storage capacity B_{\max}:
This is the technical version of the ledger above. Source variability changes when the node can transmit, not only how much energy it uses per day. If a gateway or receiver does not know the harvest process, the protocol should tolerate deferred reports, shorter payloads, local buffering, or explicit low-energy status instead of treating silence as only a link failure.
Remotely powered communication adds one more coordination boundary. A charger may transfer energy at a fixed rate, observe only past channel outputs, observe intended transmitter inputs, or share richer side information about the transmitter’s battery state. More side information can let the charger time energy transfer closer to the moments when the transmitter needs it, but it is not free: the design must account for observation cost, control latency, regulatory power limits, and what the receiver should infer from silence. Record whether the transmitter adapts coding or modulation to instantaneous battery level and whether the gateway can distinguish low-energy silence from an ordinary link failure.