← Back to the chapter · Next detail →

Technical detail · End-to-End Testing: Field Conditions and Evidence

Battery energy, sag, and installed radio power

33.3.1 Battery Energy and Installed Radio Power

This note shows why a battery estimate must include voltage sag, usable capacity, and the installed antenna. The calculations are a worked example, not a substitute for testing the finished device.

The mathematical gist. A milliamp-hour (mAh) measures electric charge; a volt (V) measures electrical pressure; a watt-hour (Wh) measures energy. A 2400 mAh, 3.6 V cell stores 8.64 Wh by nameplate, but a 120 mA pulse through 3 Ω sags 0.360 V. Derating means reducing the nameplate capacity to allow for real limits; after explicitly retaining 80% of nameplate capacity, 1920 mAh at an 80 microampere (µA) average gives 24,000 hours, or 2.74 years. Antenna gain in dBi compares an antenna with an ideal reference antenna. dBm is radio power measured relative to 1 milliwatt (mW). Equivalent isotropically radiated power (EIRP) combines transmitter power and antenna gain into the apparent radiated power; conducted power is the power delivered from the transmitter into the antenna feed. A 6 dBi antenna changes a 20 dBm EIRP-limited radio from 20 to 14 dBm conducted power, so the installed antenna belongs in the same test.

← Back to the chapter · Next detail →