← Back to the chapter · Next detail →
Technical detail · NB-IoT Power Saving (PSM/eDRX)
Timer boundaries and host responsibility
The underlying state machine has three reviewable boundaries. After a device-originated transaction, active time can keep the device reachable for pending downlink. eDRX provides periodic paging opportunities while reducing continuous listening. PSM removes paging reachability until an application event or periodic update wakes the device. When both modes are granted, the eDRX paging opportunities belong within active time; PSM follows its expiry. Exact values and transitions depend on the network grant and modem implementation, so observe them rather than infer them from requested constants.
The host application belongs in this model too. It decides when sensors run, when flash is written, when the modem may wake, how retries are bounded and when queued commands are safe to apply. A modem can enter PSM correctly while a regulator, debug interface, sensor heater or retry loop keeps the board above its expected current. Pair modem-state evidence with board-level measurement at every boundary.
Predict the trace after uplink: reachable behavior for the granted active interval, paging where eDRX applies, then PSM entry if granted. Compare that prediction with mode-entry and mode-exit logs, actual current and downlink results. Reject a battery estimate that substitutes a requested timer for observed duration.