← Back to the chapter · Previous detail
Technical detail · NB-IoT Architecture
One-PRB downlink and NPRACH access
An NB-IoT downlink carrier occupies one LTE physical resource block: 12 subcarriers at 15 kHz spacing, for 180 kHz nominal occupied bandwidth. The named physical signals and channels share that narrow grid:
| Downlink element | Job |
|---|---|
| NPSS and NSSS | Cell timing and physical-cell identity acquisition |
| NPBCH | Broadcasts the narrowband master information needed to enter the cell |
| NRS | Provides reference symbols for channel estimation and coherent demodulation |
| NPDCCH | Carries downlink control information, including scheduling grants |
| NPDSCH | Carries scheduled system information and user data |
The UE cannot jump directly to application data. It searches for NPSS/NSSS, decodes NPBCH, reads required system information on NPDSCH, and then uses the random-access procedure to request uplink resources. Coverage repetitions can repeat these elements over time; the 180 kHz frequency footprint stays narrow while latency and energy grow.
NPRACH is the uplink random-access channel. A preamble is sent as groups of single-tone symbols, and the tone index hops between symbol groups according to the configured pattern. The hopping gives the eNodeB frequency-diverse observations and identifies the access preamble without requiring a wide simultaneous uplink. After detecting NPRACH, the network returns a random-access response with timing and uplink resource information; only then can the UE continue the scheduled access exchange.
Keep channel access and application delivery separate in logs. Record cell acquisition, NPRACH attempt and repetition level, random-access response, timing advance, scheduled uplink, core path, application message ID, and acknowledgement. A visible NPSS proves a cell can be detected. A successful NPRACH proves an access preamble was detected. Neither alone proves registration, bearer or SCEF delivery, SGi reachability, or application receipt.