← Back to the chapter · Previous detail · Next detail →

Technical detail · Cellular IoT Overview and Evolution

Coverage, sleep and the antenna budget

Coverage is not a yes-or-no map. It depends on the operator, supported bands, antenna, ground plane, enclosure, mounting position, building materials, network load, firmware behavior, and power mode. Good evidence combines signal strength, signal quality, attach time, retry count, packet delivery, and current draw at representative locations or routes.

Power-saving modes can reduce energy use, but they also shape when the device can be reached and how quickly it recovers from network events. PSM and eDRX decisions should be reviewed with the application downlink promise, retry policy, firmware update plan, and measured current traces. A spreadsheet battery estimate is not release evidence until it is tied to measured behavior.

Power-saving mode (PSM) and extended discontinuous reception (eDRX) must fit the application’s downlink promise. Use Cellular IoT Power Optimization when sleep modes, retries, current traces and battery targets drive the decision.

With 220 mA active current, 5 µA sleep current and one daily report, a 2 s attach plus 1 s transfer averages about 12.6 µA. In the illustrative model, an ideal 3 dB repetition penalty doubles attach time and raises the estimate to 17.7 µA, cutting an ideal 2400 mAh life bound from 21.7 to 15.5 years. Field life still needs measured current, retries, ageing and temperature.

← Back to the chapter · Previous detail · Next detail →