← Back to the chapter · Previous detail · Next detail →
Technical detail · Edge Data: Semantic Compression and Pipelines
Factory FFT implementation
# Pseudocode for an edge processing pipeline (runs on ESP32 every 10 seconds)
def vibration_pipeline():
# 1. Collect 10 seconds of data
samples = collect_samples(rate=500, duration=10) # 5000 samples
# 2. Apply FFT (frequency-domain analysis)
fft_result = numpy.fft.rfft(samples) # -> 2501 nonnegative-frequency bins
# 3. Extract critical frequency bins
# Bin width = 500 Hz / 5000 samples = 0.1 Hz per bin
# Bin index = frequency / bin_width
bin_width = 500.0 / 5000 # 0.1 Hz per bin
target_freqs = [50, 65, 80, 95, 110, 125, 140, 155, 170, 200] # Hz
bins = [fft_result[int(f / bin_width)] for f in target_freqs]
# Ten complex FFT coefficients; select frequencies against fault traces.
# 4. Quantize calibrated magnitudes to uint16 before transmission.
# Pseudocode: calibrated_range defines magnitude units; saturate out-of-range values
# and send scale/units metadata so the receiver can interpret each magnitude.
magnitudes_u16 = quantize_to_uint16([abs(v) for v in bins], calibrated_range)
transmit_to_cloud(magnitudes_u16) # 10 x 2 bytes = 20 bytes vs 10,000 bytes
return magnitudes_u16
# Data reduction: 5000 int16 samples -> ten uint16 magnitudes = 500x by payload bytes