Checkpoint: Voltage Must Be Proved Before Power

Knowledge check · self-test
Checkpoint: Voltage Must Be Proved Before Power
Static discharge and bad power sequencing can damage parts; follow ratings.
Static discharge and bad power sequencing can damage parts; follow ratings.
::: {.callout-note} ##
Checkpoint: Voltage Must Be Proved Before Power {.depth-l1 data-narration="suspended-until-rerecord"}
Do not connect the sensor until you can name both sides of the interface. In this example the unsafe pair is `5V` ECHO into a `3.3V` ESP32 GPIO, and the safe divider recomputes to `3.11V` from the chapter's `2k` and `3.3k` resistors.
:::
Back to Common Sensor Mistakes: Voltage Must Be Proved Before Power