Skip to content

Check: Explain the changed reading

Knowledge check · self-test

Check: Explain the changed reading

Predict the Readout Before Moving the Target. A reflected signal depends on the target as well as its distance. Predict the change before checking each case. Predict: The white carton is replaced by black card at the same 40 cm mark. What happens to reflected infrared intensity? Check: It will usually fall, although the actual change depends on the material and sensor geometry. Predict: The ultrasonic echo grows from 5.83 ms to 11.66 ms under the same air conditions. What distance follows? Check: The round-trip time doubled, so the estimated distance doubles from about 1.00 m to about 2.00 m. Before releasing a light or proximity lab result, confirm the evidence record includes: Start by the physical quantity measured: lux, ADC count, presence, echo time, capacitance, or distance. Then the readout chain: I2C part, voltage-divider orientation, PIR module output, transimpedance amplifier, or trigger/echo timing. Next the threshold units and mounting geometry used during calibration. After that ambient-light, reflectance, temperature, and crosstalk checks relevant to the sensor type. Finally hysteresis or debounce rules for thresholds that can chatter near the boundary.

Back to the chapter →

Predict the Readout Before Moving the Target. A reflected signal depends on the target as well as its distance. Predict the change before checking each case. Predict: The white carton is replaced by black card at the same 40 cm mark. What happens to reflected infrared intensity? Check: It will usually fall, although the actual change depends on the material and sensor geometry. Predict: The ultrasonic echo grows from 5.83 ms to 11.66 ms under the same air conditions. What distance follows? Check: The round-trip time doubled, so the estimated distance doubles from about 1.00 m to about 2.00 m. Before releasing a light or proximity lab result, confirm the evidence record includes: Start by the physical quantity measured: lux, ADC count, presence, echo time, capacitance, or distance. Then the readout chain: I2C part, voltage-divider orientation, PIR module output, transimpedance amplifier, or trigger/echo timing. Next the threshold units and mounting geometry used during calibration. After that ambient-light, reflectance, temperature, and crosstalk checks relevant to the sensor type. Finally hysteresis or debounce rules for thresholds that can chatter near the boundary.

A reflective sensor depends on the surface as well as distance. Dark and light targets can return different amounts of light.

Back to Light and Proximity Readout Physics: Keep a Reviewable Release Record