Skip to content

Check: Logic Level and Level Shifting Contracts

Knowledge check · self-test

Check: Logic Level and Level Shifting Contracts

Probe both voltage domains during a real bus exchange. Power sequencing adds another logic-level contract. If the 5 V board stays on while the 3.3 V controller is off, a signal may feed current through an unpowered input. The translator datasheet must state its powered-off behaviour. A safe HIGH and LOW during normal use do not prove the link is safe during start-up or shutdown. Predict: A resistor divider makes a 5 V output safe for a 3.3 V input. Can it also drive the reverse direction automatically? Check: No. A fixed divider only scales one driven direction and can distort a bidirectional bus. Predict: Both datasheets call 2.0 V a valid HIGH at the relevant rails. Is a level shifter always required for that direction? Check: Not for threshold matching alone, but voltage limits, output type, speed, and power-off behaviour still need checking.

Back to the chapter →

Probe both voltage domains during a real bus exchange. Power sequencing adds another logic-level contract. If the 5 V board stays on while the 3.3 V controller is off, a signal may feed current through an unpowered input. The translator datasheet must state its powered-off behaviour. A safe HIGH and LOW during normal use do not prove the link is safe during start-up or shutdown. Predict: A resistor divider makes a 5 V output safe for a 3.3 V input. Can it also drive the reverse direction automatically? Check: No. A fixed divider only scales one driven direction and can distort a bidirectional bus. Predict: Both datasheets call 2.0 V a valid HIGH at the relevant rails. Is a level shifter always required for that direction? Check: Not for threshold matching alone, but voltage limits, output type, speed, and power-off behaviour still need checking.

Back to Logic Level and Level Shifting Contracts: Translate a Shared Bus in Every Power State