Skip to content

Checkpoint: Failure Modes

Knowledge check · self-test

Checkpoint: Failure Modes

Predict welded-contact behaviour, check a heater rating, and choose suppression for an inductive load.

Back to the chapter →

Predict welded-contact behaviour, check a heater rating, and choose suppression for an inductive load.

You now know:

  • Welded contacts can leave a heater or motor permanently powered, so fuses, breakers, enclosures, and fail-safe defaults are part of the actuator design.
  • An 8 A inductive load may require about a 20 A relay after derating by 0.4 and adding margin.
  • A 2 A, 200 ms lock solenoid pulse can support about 22,500 theoretical battery cycles before practical derating and standby load.

Back to Relays and Solenoids: Switching Choice and Safety: Checkpoint: Failure Modes