Multi-Scale Vibration Monitor
Multi-Scale Vibration Monitor
Multi-Scale Vibration Monitor
Vibration can be separated into low, middle, and high frequency bands so each band can signal a different kind of machine behavior. The monitor filters the accelerometer readings into those ranges and measures their strength.
Goal: Implement Pacinian-like sensing with different frequency bands.
Hardware:
The ADXL345’s maximum output data rate is 3,200 Hz, while its corresponding bandwidth is 1,600 Hz (Analog Devices ADXL345 Data Sheet, Table 7, Output Data Rate and Bandwidth). Finally three frequency bands.
Start by slow (0.5-10 Hz): bearing wear. Then medium (10-100 Hz): motor imbalance. Finally fast (100-1000 Hz): crack formation.
Algorithm:
Root mean square (RMS) is a typical signal magnitude that preserves the contribution of both positive and negative vibration. Sample at 3,200 Hz, then apply band-pass filters (digital IIR). Next calculate RMS power in each band. Finally trigger alerts per band.
Biomimetic parallel: Just like skin has Merkel (slow), Meissner (medium), Pacinian (fast) receptors