Try It: Lux Level Explorer

Try It: Lux Level Explorer

animation
sensors
Try Keep Light level (lux) at 350 and switch Scale from Linear to Logarithmic.
Observe At 350 lux, the classification is Normal (home/office) and LED Backlight PWM is 155 of 255. Scale changes the bar length while those readouts stay the same.
Explain Light level (lux) selects a fixed brightness band; Scale changes whether the bar uses a direct ratio or a base-10 logarithm.

Technical boundaries. The explorer assumes fixed lux thresholds and discrete PWM values rather than a continuous brightness response. Its range warning uses a fixed 65,535-lux cutoff and does not model changes to sensor measurement time.

NoteTry It: Lux Level Explorer

Adjust the lux value to explore the example light levels. Compare it with the reference table below. The explorer warns that values above 65,535 lux need another sensor, but that is a limit of this simplified example: the BH1750 can extend its range to 100,000 lux by adjusting measurement time. Check the mode and data sheet before choosing a sensor for bright light.

Back to the chapter