Interactive: Live Kalman Filter Tuner

Interactive: Live Kalman Filter Tuner

animation
sensors
Try Keep Signal type on Constant + Noise, Q (process noise) at 0.1, R (measurement noise) at 1 and Noise level at 1, then lower Q.
Observe With Q (process noise) at 0.1 and R (measurement noise) at 1, final Kalman gain and uncertainty both round to 0.270 and behavior reads Balanced.
Explain Q (process noise) is added to uncertainty before each update; the gain divides that uncertainty by its sum with R (measurement noise) to weight the measurement correction.

Technical boundaries. The estimator assumes a scalar state, starting estimate 25 and uncertainty 1, over 100 synthetic samples per redraw. Noise is deterministic and its seed depends on Q and R, so changing those controls also changes the generated measurements; this is not a live sensor stream.

Interactive: Live Kalman Filter Tuner

Watch the Kalman filter in action! Adjust Q and R to see how they affect filtering behavior. The chart shows raw noisy data (gray) vs. filtered output (blue).

Try these experiments:

  1. Smooth a noisy constant: Set Q=0.01, R=2.0 → Watch filtered line become very smooth
  2. Track fast changes: Set Q=0.5, R=0.1 → Better step response but noisier
  3. Random walk challenge: Select “Random Walk” → See how filter tracks drifting signal
  4. Find your balance: Adjust until filtered tracks signal without excess noise

Back to the chapter