Indoor Multi-Sensor Fusion

Indoor Multi-Sensor Fusion

animation
sensors

Indoor Multi-Sensor Fusion

Indoors, each source can fill a gap in another. Radio readings can anchor position, motion sensors track changes, and air pressure can help distinguish floors. Test the combined error at your own site.

Tip

Goal: Combine Wi-Fi RSSI + IMU + barometer for room-level positioning.

Sensors needed:

Use Wi-Fi from three or more access points, an IMU for motion between fixes, and a barometer as a possible floor cue. RSSI-based ranging needs known access-point locations, a calibrated model, and site tests.

Fusion strategy:

For an assumed example, a Wi-Fi fix arrives every 5 seconds with 5 m error, and the barometer has 3 m height error. The IMU tracks motion between fixes but drifts. These values and the floor cue must be tested at the site before they are used in a filter.

Test target: For example, aim for 2 m horizontal error and the correct floor, then measure performance across the site. These are goals, not guaranteed results.

Back to the chapter