TryKeep Sensor Type at Temperature (DHT22), Initial calibration error (°C or unit) at 0.1 and Acceptable tolerance (°C or unit) at 0.5; change Deployment environment.
ObserveWith Indoor (stable), the displayed rate is 0.020 units/month, both interval readouts show >12 months, and all 13 timeline bars stay green.
ExplainThe default error grows from 0.1 by 0.02 each month; the tolerance gap divided by this rate gives 20 months before rounding and the display cap.
Technical boundaries. The projection assumes constant positive drift from a fixed illustrative sensor-and-environment lookup. Its suggested interval is floored at 80% of the calculated time and never falls below one month; these rates are not validated maintenance predictions.
Try It: Calibration Drift Estimator.
Drift can move a reading outside its allowed error. This estimator uses illustrative rates, not validated predictions for a particular sensor. Use it to explore a scenario, not to set a deployment maintenance schedule. Set that schedule from measured drift, conditions and consequences.
Note
Sensors drift over time due to aging, contamination, and environmental stress. Estimate when your sensor will exceed its accuracy tolerance and needs recalibration.