Step 1: Compare Classic Mesh and Long Range

Step 1: Compare Classic Mesh and Long Range

animation
z-wave
protocols

Step 1: Compare Classic Mesh and Long Range

Model one classic mesh endpoint and one Z-Wave Long Range endpoint. The classic endpoint may use repeaters. The LR endpoint should be modeled as a direct gateway-to-device star link.

  • In a worksheet or local script, draw separate classic-mesh and Long Range route lists before comparing reachability.
  • Add a mains-powered repeater only to the classic route list; keep the LR endpoint on its direct gateway path.
  • Record the route type, assumed hop count, and pass/fail assertion beside each endpoint.
  • Check the selected controller and device documentation on your own hardware before assigning an endpoint a repeater role.

The pass condition is that the model keeps the two topology rules separate. An LR endpoint may solve a direct-reach design problem, but it should not be counted as a classic mesh repeater unless the target product and controller documentation explicitly support that role.

Back to the chapter