Controller Evidence Activities

Controller Evidence Activities

animation
prototyping
hardware

Try It Now

Choose one prototype idea and classify each requirement as control evidence, application evidence, or boundary evidence. Then write one sentence choosing MCU, MPU, or hybrid and name the first measurement that could prove the choice wrong.

Pick the First Disproving Test

A cold-room monitor uses an ESP32, an SHT31 probe, and a buzzer. A Pi gateway stores readings and uploads them when Wi-Fi returns. The buzzer must sound within 500 ms of a threshold crossing.

What would you test first on each side? Time the endpoint from the crossing to the buzzer, including sampling and driver delay. For the gateway, test whether a service restart preserves queued readings and sends them after the link returns.

NoteBoundary Test

Unplug, reset, or pause one side of the hybrid prototype during review. The other side should enter a known state and leave enough evidence to explain what happened.

Match Controller Evidence

Use the next exercise to connect each controller choice with the test that supports it. Pay special attention to the messages and timeout at a hybrid boundary.

Order the Controller Selection Review

Choose the question and its test before fixing the controller class. Put the review steps in order.

Back to the chapter