Power Budget Calculator

Power Budget Calculator

Calculate and Optimize IoT Device Power Consumption

IoT Power Budget Lab

Estimate battery life from component current, duty cycle, battery capacity, and regulator efficiency, then diagnose which design choice most limits the device.

Try
Set Battery Type to Li-SOCl2, Capacity to 2400 mAh, and Deep Sleep duty cycle to 99.50% before Calculate.
Observe
The average-current ring and battery-life estimate change together when Active time rises from 0.05%.
Explain
Calculate sums each component current multiplied by duty cycle, so persistent sleep leakage can outweigh rare peaks.
Goal
Build a defensible power budget from active, standby, and deep-sleep currents.
Try
Load a preset, change active time from 0.05%, then compare target life and peak-current risk.
Watch
Use average current, daily energy, top consumers, and what-if rows together.
Reflect
Would you optimize firmware duty cycle, component choice, or battery size first?

Guided Investigation

  1. Start with Long-Life BLE Beacon and notice how tiny active time changes the result.
  2. Switch to Asset Tracker and identify why GPS or radio use dominates.
  3. Use the what-if table before changing components so your optimization has a reason.

Scenario Focus

Long-Life BLE Beacon is tuned to show how a small active window, deep sleep, and a coin cell interact.

Quick Presets
Ready: Long-Life BLE Beacon loaded

Device Profile

Components

Duty Cycle

0.05%
0.45%
99.50%
Deep sleep is the remaining time after active and standby.
Active
0.05%
Standby
0.45%
Deep Sleep
99.50%

Battery Life Estimate

--
days
--
Avg Current
--
Peak Current
--
Design Score
--
Avg Power
INFO
--
Daily Energy
INFO
--
Target

Average Current Distribution

Design Diagnosis

Load a scenario to see the power budget diagnosis.

    Top Consumers

    Component Average Share

    What-If Comparison

    Change Life Meaning

    Engineering Checks

    Check Current Signal Status