TrySet Input voltage (V) to 5 with R1 (Ω) at 1800 and R2 (Ω) at 3300. Increase only R1 (Ω) and compare voltage with current.
ObserveThe initial divider produces 3.24 V, draws 0.98 mA and dissipates 4.90 mW. Raising R1 (Ω) lowers both output voltage and divider current.
ExplainInput voltage (V) is multiplied by R2 (Ω) divided by the sum of both resistors; total current comes from voltage divided by that same sum.
Technical boundaries. The divider assumes no load at its output and uses a fixed nominal 3.3 V comparison. It omits resistor tolerance and ADC settling, so that comparison alone does not establish a device input limit.
TipVoltage Divider Value Trials
Change one resistor at a time and compare the output and current. The ideal calculation assumes no load; check pin limits, tolerances and ADC settling before using a result in a circuit.