Voltage Divider Calculator

Voltage Divider Calculator

animation
electronics
Try Leave Input Voltage (V) at 5 and both R1 - Top Resistor (Ω) and R2 - Bottom Resistor (Ω) at 10000, then change the bottom resistor.
Observe The equal-resistor starting point gives 2.500 V output, a 50.0% division ratio and 250.0 µA through the divider.
Explain R2 - Bottom Resistor (Ω) divided by the sum of both resistors sets the fraction of Input Voltage (V) at the output.

Technical boundaries. This model assumes an unloaded divider with exact resistor values. Its fixed 3.3 V comparison does not account for ADC acquisition time, input loading, resistor tolerance or voltage transients.

Voltage Divider Calculator

A divider scales a voltage using two resistors. The displayed output assumes no load. A result below 3.3 V alone does not prove ADC safety or range: check the actual input limits, resistor tolerance, transients, loading, and acquisition settling time.

Back to the chapter