Oversampling Resolution Calculator

Oversampling Resolution Calculator

animation
electronics
Try Keep Native ADC Resolution (bits) at 10 and Reference Voltage (V) at 3.3 while you change Number of Averaged Samples away from 16.
Observe The opening estimate adds 2.0 bits, giving 12.0 effective bits and 4.0× finer measurement.
Explain Number of Averaged Samples contributes half its base-two logarithm in extra bits, which reduces the calculated voltage step.

Technical boundaries. This estimate assumes suitable independent noise or dither and appropriate filtering and decimation; it does not generate sample data. The displayed Effective Max Error is half an effective step, not a guaranteed bound on individual errors.

Oversampling Resolution Calculator

Change the oversampling factor and predict the ideal change in effective resolution. Compare the displayed estimate with the result. Dither is a small varying signal added before conversion. Decimation means keeping a lower-rate output after filtering. For a stable signal, four sufficiently independent samples with suitable noise or dither can support one extra effective bit after filtering or averaging and decimation. For example, four samples near a code boundary may alternate between adjacent codes; their mean can resolve a half-step. Repeating the same noiseless code four times adds no information. Keep the signal bandwidth within the filter passband. The widget’s “Effective Max Error” is not a guaranteed maximum: averaging independent noisy samples reduces RMS noise statistically, but an individual result can exceed half an effective step. With an 8-bit, 3.3 V span and four samples, a valid sequence can produce 6.32 mV error even though the widget displays 3.22 mV. Use the noise distribution and the actual converter model to assess error.

Back to the chapter